Bathroom Installation Croydon
Need a bathroom fitted, upgraded, or partly renovated? MPS Heating & Plumbing LTD helps with bathroom plumbing, shower fitting, toilets, basins, baths, taps, drainage, towel rails and pipework across Croydon.
A good bathroom install is not just about making it look tidy. The hidden pipework, waste runs, isolation valves, water pressure, hot water supply and drainage need to be right first. That is the bit people regret cutting corners on.
We help homeowners, landlords and small property managers in Croydon, Thornton Heath, Selhurst, Norbury, Addiscombe, South Croydon, East Croydon and West Croydon. Open daily from 8am until 2am.
New bathroom, shower, toilet, basin, or bath?
62 Reviews
8am–2am
South London
Bathroom fitting is mostly won or lost behind the tiles
Most people searching for bathroom fitters want the same thing: someone who can get the job done properly without turning the house upside down for weeks. Fair enough. Bathrooms are disruptive. You notice every delay because you use the room every day.
The visible finish matters, of course. But the plumbing side is what decides whether the bathroom actually works. Shower pressure. Hot water. Waste pipes. Toilet position. Basin trap. Tap connections. Isolation valves. Bath waste access. Extractor fan position if electrics are being arranged. Small things, but they matter.
In Croydon homes, the bathroom layout is not always generous. Flats near East Croydon can have tight service voids. Older houses in Thornton Heath and Norbury may have pipework that has been altered several times. Some South Croydon properties have bathrooms added into spaces that were never originally designed for one.
Good rule: before choosing tiles, taps or a fancy rainfall shower, check the water pressure, waste route, hot water setup and whether the existing pipework is worth reusing.
Check the existing bathroom
We look at the pipework, waste runs, water pressure, hot water supply, access, isolation valves and what can realistically stay.
Agree the scope clearly
Full bathroom installation, bathroom plumbing, new shower, toilet replacement, basin fitting, bath swap, taps, drainage or towel rail work.
Fit, connect and test
Pipework, fixtures and fittings need testing properly before everything is closed up. Leaks behind finished work are a nightmare.
Bathroom services
Bathroom installation and fitting work we can help with
| Bathroom job | What it usually involves | What needs checking first |
|---|---|---|
| Bathroom installation | Plumbing-led bathroom fitting, fixtures connected, pipework adjusted, wastes installed and the bathroom tested properly. | Layout, hot water supply, pressure, drainage, access, tiling schedule and whether other trades are needed. |
| Bathroom plumbing | Pipework for showers, baths, basins, toilets, taps, valves, towel rails and waste connections. | Old pipe condition, isolation points, flow rate, concealed leaks and whether the existing runs are sensible. |
| Shower installation | Mixer showers, shower valves, shower heads, riser rails, trays, wastes and pipework adjustments. | Combi boiler performance, cylinder setup, water pressure, drainage fall and whether the wall can take concealed fittings. |
| Toilet installation | New toilet fitted, pan connector checked, cistern connected, fill valve and flush tested. | Soil pipe position, floor fixing, boxing, leaks, old isolation valves and whether the toilet projection suits the room. |
| Basin, taps and vanity units | Basin or vanity fitted, taps connected, trap installed, wastes tested and hot/cold feeds tidied. | Wall strength, waste height, tap holes, flexible hose access and whether the unit leaves enough space. |
| Bath replacement | Old bath removed, new bath fitted, waste connected, taps installed and panels finished where suitable. | Access, floor level, waste route, bath size, screen position and whether the old pipework lines up. |
| Towel rails and bathroom radiators | New towel radiator fitted or existing radiator replaced, valves connected and the heating system checked. | Pipe centres, boiler pressure, system balancing, wall fixing and whether the radiator output is enough. |
Looking for bathroom fitters in Croydon?
There is a difference between someone who can “make it look nice” and someone who understands the bathroom plumbing underneath. Ideally you want both. But if the pipework is wrong, the finish will not save the job.
MPS is strongest on the plumbing and heating side of bathroom work. That means pipework, drainage, showers, toilets, basins, baths, taps, radiators, towel rails, hot water issues and pressure problems. Where a job needs specialist electrics, plastering, tiling or decorating, that needs to be handled properly too. No pretending. Bathrooms usually involve more than one trade when they are full renovations.
If you have already bought a bathroom suite, we can look at what you have and tell you whether it will fit the current layout. If you are still planning, even better. It is normally easier to avoid a bad layout before everything is sitting in your hallway.
Clear scope before the job starts
A bathroom install can change price quickly if hidden pipework, rotten flooring, poor water pressure or drainage problems show up halfway through.
We prefer to be straight at the start. What is included, what is not, what could become awkward, and what needs another trade.
Bathroom renovation, remodel, or just a proper plumbing fit?
Some people call it a bathroom renovation. Some call it a bathroom remodel. In Croydon, most customers simply want the bathroom to work better, look cleaner and stop causing little problems.
The right approach depends on the room. A quick toilet and basin swap is not the same as moving a bath, adding a walk-in shower, changing pipe routes, fitting a new towel radiator and correcting low water pressure.
Small upgrade
Toilet replacement, new taps, basin swap, shower valve, bath waste, leak repair or a new towel rail. Usually less disruption, but still needs testing properly.
Bathroom refit
Multiple fixtures replaced, pipework adjusted, wastes renewed and the room brought back together with a cleaner layout.
Full renovation
Layout changes, tiling, flooring, electrics, extraction and decorating may all come into it. The plumbing plan needs to be agreed early.
Water pressure
New bathroom, same weak shower?
This is one of the biggest things people miss. They spend money on a better shower head or a smart-looking mixer, then the shower still feels weak because the pressure or hot water supply was never checked.
If you have a combi boiler, the boiler output and incoming mains flow can affect shower performance. If you have a cylinder, the setup is different again. In some older Croydon properties the bathroom plumbing has been added to, altered, boxed in, then altered again. You do not always know what you are dealing with until panels come off.
So before fitting a new shower, we want to know whether the issue is the shower, the valve, the pipework, the boiler, the cylinder, a blocked filter, or just low pressure in the property.
Bathroom checks worth doing early
- Hot and cold water flow at the basin, bath and shower.
- Whether the stopcock works properly.
- Condition of isolation valves behind toilets, basins and baths.
- Waste pipe fall and signs of slow drainage.
- Boiler or cylinder performance if the shower runs hot and cold.
- Hidden leaks around old bath wastes, traps and shower seals.
For pressure issues, see our guide on low water pressure.
The awkward bathroom problems are usually small, hidden things
Old isolation valves
A toilet or basin swap should be simple. Then the old isolation valve will not shut off, or starts weeping as soon as it is touched. Very common in older bathrooms.
Bad waste runs
Slow-draining baths and basins are not always “blocked drains”. Sometimes the waste pipe has poor fall, too many bends, or an awkward run from a past refit.
Poor shower pressure
A new shower does not automatically fix poor pressure. The supply, boiler, cylinder, valve and pipework all need checking before promising a better result.
We have seen bathroom jobs where the customer bought the suite first, then found out the toilet projection blocked the door swing or the vanity waste did not line up with the existing pipework. Not the end of the world. Just avoidable with a quick check first.
Process
How MPS approaches bathroom installation
First, we work out what you are actually trying to achieve. A nicer bathroom? Better shower pressure? A leaking bath replaced? A rental property freshened up? A full bathroom renovation? Different goals, different job.
Then we look at the plumbing. That means water feeds, wastes, valves, drainage, heating, towel rails and hot water. If something needs another trade, we say so. It is better to know before the bathroom is stripped out.
Once the work starts, the basics matter: isolate properly, protect the area, remove what needs removing, alter pipework cleanly, fit the fixtures, test the wastes, test hot and cold, check for leaks, then explain anything the customer needs to know.
Photos or visit
Photos can help for smaller jobs. For a bathroom renovation or layout change, a visit usually gives a clearer answer.
Scope and quote
We separate plumbing work from any tiling, electrics, flooring or decorating so the job is not vague.
Installation and testing
Every fixture needs checking. Toilets, taps, shower valves, wastes, traps, baths and basins all need proper testing before the job is called done.
Connected problems
Bathroom plumbing often links to other issues
Leaks and pipework
If a bathroom leak is coming from a pipe joint, waste, trap or hidden connection, the repair needs sorting before new units are fitted. See leaking pipe repairs in Croydon.
Blocked wastes
Slow basin, bath or shower drainage can affect the bathroom finish and smell. If the issue is a blockage, start with blocked sink help.
Hot water and boilers
If the shower runs cold or your hot water keeps dropping off, the bathroom may not be the root problem. It could be linked to a fault that needs boiler repairs, or you may have heating but no hot water, which is a common issue with combi boilers and hot water systems.
Already bought the bathroom suite?
Send photos of the bath, toilet, basin, shower, taps and the existing bathroom if you can. The more we can see, the easier it is to tell whether it is a straightforward fit or if pipework, drainage or pressure needs checking first.
For full bathroom renovations, we will be honest about what is plumbing work and what needs other trades. That keeps the job cleaner and avoids confusion halfway through.
Useful photos to send
- The current bathroom from each corner.
- Under the basin if accessible.
- Behind or beside the toilet.
- The bath panel area if removable.
- The shower valve, shower head and tray.
- Any leaks, stains, mould patches or swollen flooring.
Bathroom fitter, plumber, or heating engineer?
| Trade | Usually handles | Where MPS fits in |
|---|---|---|
| Bathroom fitter | General bathroom installation, fixtures, fitting, layout, coordination and finish. | MPS can help with plumbing-led bathroom fitting and fixture installation where pipework and water systems are central. |
| Plumber | Water feeds, wastes, toilets, taps, basins, baths, showers, leaks, pipework and drainage connections. | This is the core bathroom work MPS is best placed to handle. |
| Heating engineer | Boilers, cylinders, hot water performance, towel rails, radiators and heating system issues. | Useful when bathroom hot water, shower performance or towel radiators connect to the heating system. |
| Electrician | Bathroom lighting, extractor fans, electric showers, shaver points and electrical safety zones. | Electrical bathroom work should be handled by a qualified electrician where required. |
| Tiler/decorator | Tiles, grout, finishing, painting, flooring and making the room look complete. | Important on full renovations, but separate from the plumbing quality behind the finish. |
Related bathroom, plumbing and boiler help
No Hot Water But HeatingFAQs
Bathroom installation questions
Do you offer bathroom installation in Croydon?
Yes. MPS Heating & Plumbing LTD helps with bathroom installation and bathroom plumbing across Croydon and nearby South London areas. This includes showers, baths, basins, toilets, taps, pipework, wastes, drainage connections, towel rails and plumbing-led bathroom fitting.
Are you bathroom fitters or plumbers?
MPS is a plumbing and heating company, so the strongest part of our bathroom work is the pipework, fixtures, drainage, hot water and heating side. For full bathroom renovations, other trades such as tiling, electrics, flooring or decorating may also be needed depending on the job.
Do I need a plumber to fit a bathroom?
For most bathroom installations, yes, you need a plumber for the water feeds, waste pipes, toilet, basin, bath, shower, taps and leak testing. Even if a bathroom fitter is handling the general finish, the plumbing needs to be right before anything is boxed in or tiled over.
Can you fit a bathroom I have bought separately?
Yes, we can look at a bathroom suite you have already bought and check whether it suits the existing layout. The main things to check are toilet projection, basin size, bath length, shower type, waste positions, pipework access and water pressure.
How long does a bathroom installation take?
It depends on the scope. A toilet, basin, shower or bath replacement can be much quicker than a full bathroom renovation. A full bathroom install involving pipework changes, tiling, flooring, electrics and decorating takes longer because several stages need to happen in the right order.
How much does a bathroom renovation cost?
The cost depends on the bathroom size, fixtures, pipework changes, tiling, flooring, electrics, disposal and how much of the layout is changing. A simple plumbing-led upgrade is usually very different from a full bathroom renovation or remodel with multiple trades involved.
What is the difference between bathroom installation and bathroom renovation?
Bathroom installation usually means fitting the bathroom fixtures and plumbing them in. Bathroom renovation is broader and may include stripping the room, changing the layout, tiling, flooring, lighting, decorating and sometimes building work.
Can you install a shower?
Yes. MPS can help with shower installation, shower valves, mixer showers, shower heads, shower wastes and pipework. Before fitting a new shower, it is worth checking the water pressure and hot water setup so the new shower performs properly.
Can low water pressure affect a new bathroom?
Yes. Low water pressure can affect showers, bath filling times, basin taps and overall bathroom performance. If pressure is already poor, it should be checked before choosing certain shower types or bathroom fittings.
Can a boiler problem affect bathroom hot water?
Yes. If you have a combi boiler, the boiler can affect shower temperature, flow rate and hot water performance. If the bathroom hot water keeps going hot and cold, the problem may not be the shower itself.
Do you install toilets, basins, baths and taps?
Yes. MPS can fit toilets, basins, baths, taps, wastes, traps and related pipework. We also check for leaks and make sure the fittings are tested before the job is finished.
Do you cover areas outside Croydon?
Yes. MPS covers Croydon and nearby areas including Thornton Heath, Selhurst, Norbury, Addiscombe, South Croydon, East Croydon, West Croydon and parts of South London.
Need a bathroom fitted in Croydon?
Call MPS Heating & Plumbing LTD or send photos of the bathroom, fixtures and pipework. We’ll help you work out whether it is a simple bathroom plumbing job, a fixture replacement, or a bigger bathroom installation that needs planning properly.